Lantronix SLB Lantronix SLB - User Guide - Page 77
Secure Lantronix Network, NFS and SMB/CIFS Commands
View all Lantronix SLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
7: Services 4. To save, click the Apply button. NFS and SMB/CIFS Commands The following CLI commands correspond to the web page entries described above. To mount a remote NFS share: set nfs mount Parameters: locdir mount remdir rw Enables read/write access to remote directory. Note: The remdir and locdir parameters are required, but if you specified them previously, you do not need to provide them again. To unmount a remote NFS share: set nfs unmount To view NFS share settings: show nfs To configure the SMB/CIFS share, which contains the system and device port logs: set cifs Parameters: eth1 eth2 state workgroup Note: The admin config command saves SLB configurations on the SMB/CIFS share. To change the password for the SMB/CIFS share login (default is cifsuser): set cifs password To view SMB/CIFS settings: show cifs Secure Lantronix Network Use the Secure Lantronix Network option to view and manage Secure Lantronix Managers and Spiders on the local subnet. SLB - Branch Office Manager User Guide 77