Lantronix SLB Lantronix SLB - User Guide - Page 124

8: Device Ports To rename a script: 1. In the Scripts table, select the script and enter a new script name in the New Name field. 2. Click the Rename Script button. The script will be renamed and the Devices > Scripts page redisplays. To delete a script: 1. In the Scripts table, select the script to delete. 2. Click the Delete Script button. After a confirmation, the script will be deleted and the Devices > Scripts page redisplays. To change the permissions for a script: 1. In the Scripts table, select the script and select the new Group and/or Permissions. 2. Click the Change Permissions button. The script updates and the Devices > Scripts page redisplays. To use a script at the CLI: 1. To run an Interface Script on a device port for pattern recognition and action generation, use the connect script deviceport command. 2. To run a Batch Script at the CLI with a series of CLI commands, use the set script runcli command. Batch Script Syntax The syntax for Batch Scripts is exactly the same as the commands that can be typed at the CLI, with the additions described in this section. The sleep command suspends execution of the script (puts it to 'sleep') for the specified number of seconds. Syntax: sleep The while command allows a loop containing CLI commands to be executed. Syntax: while {} { CLI command 1 CLI command 2 ... CLI command n } Note: The closing left brace '}' must be on a line without any other characters. To support a while command, the set command, variables, and secondary commands are also supported. SLB - Branch Office Manager User Guide 124