Lenovo ThinkPad T520 (English) User Guide - Page 224
Restart menu, ThinkPad Setup items, Exit Saving Changes
View all Lenovo ThinkPad T520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Restart menu If you need to close the ThinkPad Setup and restart the system, select Restart from the ThinkPad Setup menu. The following submenu is displayed: • Exit Saving Changes: Restart the system after saving the changes. • Exit Discarding Changes: Restart the system without saving the changes. • Load Setup Defaults: Load the default setting that was in effect at the time of purchase. • Discard Changes: Discard the changes. • Save Changes: Save the changes. ThinkPad Setup items The following tables show the contents of the Config menu, the Security menu, and the Startup menu of the ThinkPad Setup. Note: Some items are displayed on the menu only if the computer supports the corresponding features. Notes: • Enabled means that the function is configured. • Disabled means that the function is not configured. • Default values are in boldface. Config menu items Table 8. Config menu items Menu item Network Submenu item Wake On LAN Selection • Disabled • AC only • AC and Battery Ethernet LAN Option ROM • Disabled • Enabled Comments Enable the system to Power on when the Ethernet controller receives a magic packet. If you select "AC Only", Wake On LAN is enabled only when ac power adapter is attached. If you select "AC and Battery", Wake On LAN is enabled with any power sources. Note: AC is required with magic packet type Wake On LAN. Note: Wake On LAN function does not work when a hard disk password is set. Load the Ethernet LAN Option ROM to enable startup from an integrated network device. 206 User Guide