Lexmark CX317 User Guide - Page 124
Adjusting Sleep mode, Using Hibernate mode, Using the Embedded Web Server
View all Lexmark CX317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Saving money and the environment 124 Adjusting Sleep mode To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes. Note: The printer still accepts print jobs when in Sleep mode. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Navigate to: Settings > General Settings > Timeouts 3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode > 2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode. 3 Press . Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the control panel, navigate to: > Settings > > Settings > > General Settings > 2 Select Press Sleep Button or Press and Hold Sleep Button, and then press . 3 Press Hibernate > .