Lexmark CX317 User Guide - Page 98
Timeouts, Notes, Error Recovery, Print Recovery, Press Sleep Button
View all Lexmark CX317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Understanding the printer menus Use Timeouts Wait Timeout Disabled 15-65535 Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Error Recovery Max Auto Reboots 1-20 Print Recovery Auto Continue Disabled 5-255 Print Recovery Jam Recovery On Off Auto Print Recovery Page Protect Off On Press Sleep Button Do Nothing Sleep Hibernate 98 To Set the amount of time in seconds the printer waits for additional data before canceling a print job. Notes: • 40 is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. Set the printer to restart when an error occurs. Note: Reboot always is the factory default setting. Determine the number of automatic reboots the printer can perform. Notes: • 2 is the factory default setting. • If the printer reaches the maximum number of reboots within a certain amount of time, the printer does not continue to reboot, and the error message appears on the display. Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period. Note: Disabled is the factory default setting. Specify whether the printer reprints jammed pages. Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages. Successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page. • On sets the printer to print the entire page. Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Note: Sleep is the factory default setting.