Miele DGC 7585 Operating and Installation instructions - Page 24
Descaling tablets, FlexiClip telescopic runners HFC 71
View all Miele DGC 7585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Overview Descaling tablets For descaling the steam oven FlexiClip telescopic runners HFC 71 The FlexiClip telescopic runners can be attached to any shelf level. Push the FlexiClip telescopic runners all the way into the oven before placing accessories on them. The accessories will then automatically sit securely in between the stoppers at either end of each runner and be prevented from sliding off. Installing and removing the FlexiClip telescopic runners Danger of injury caused by hot surfaces. The steam oven gets hot during operation. You could burn yourself on the heater elements, oven compartment, side racks, or accessories. Allow the heater elements, oven compartment, the side racks, and the accessories to cool down before fitting or removing the FlexiClip telescopic runners. The FlexiClip telescopic runners are installed in between the two rails that make up a shelf level. The FlexiClip telescopic runner with the Miele logo is installed on the right. When installing or removing the FlexiClip telescopic runners, do not extend them. The FlexiClip telescopic runners can support a maximum load of 33 lb (15 kg). Hook the FlexiClip telescopic runner onto the lower rail of a shelf level at the front (1.) and push it along the rail into the oven compartment (2.). 24