Miele DGC 7585 Operating and Installation instructions - Page 34

Description of functions, Control panel, Water container, Food probe, Temperature/core temperature

Page 34 highlights

Description of functions Control panel The water container is located behind the control panel. The panel is opened and closed by touching the Lift Panel sensor button. Before the control panel closes automatically, a note appears in the display, which you must confirm with OK. The control panel is fitted with anti-trapping protection. If the control panel senses resistance when opening/closing, the process is canceled. Do not touch the upper edge of the door when the panel is opening and closing. Water container Water is pumped into the water container and then into the steam generator. A fault can occur if the opening to the water container is blocked. The opening on the front of the water container must not be blocked as otherwise water cannot be pumped into the steam generator. Food probe The probe measures the core temperature in the food, enabling the temperature during the cooking process to be monitored simply and accurately. Temperature/core temperature Some functions have a preset recommended temperature. The recommended temperature can be altered within the given range for an individual cooking program, a program stage, or for every time that program is used (see "Recommended temperatures" under "Settings"). The core temperature can also be altered within the given range for an individual program or a specific program stage. Moisture The Combi Steam  operating mode and Reheat Special Mode use a combination of oven heat and moisture. The moisture level can be selected within the given range for an individual program or a specific program stage. Depending on the moisture setting, moisture or fresh air is supplied to the oven compartment. With the moisture setting = 0%, the maximum fresh air supply is implemented and no moisture is supplied. With the moisture setting = 100%, there is no fresh air supply and the moisture content is at its maximum. Some food gives off moisture during the cooking process. This moisture from the food affects the amount of additional moisture needed. If the required amount of moisture is low, the steam generator may not be activated at all. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Description of functions
34
Control panel
The water container is located behind
the control panel. The panel is opened
and closed by touching the
Lift
Panel
 sensor button. Before the control
panel closes automatically, a note ap-
pears in the display, which you must
confirm with
OK
.
The control panel is fitted with anti-trap-
ping protection. If the control panel
senses resistance when opening/clos-
ing, the process is canceled. Do not
touch the upper edge of the door when
the panel is opening and closing.
Water container
Water is pumped into the water con-
tainer and then into the steam genera-
tor.
A fault can occur if the opening to
the water container is blocked.
The opening on the front of the water
container must not be blocked as
otherwise water cannot be pumped
into the steam generator.
Food probe
The probe measures the core tempera-
ture in the food, enabling the tempera-
ture during the cooking process to be
monitored simply and accurately.
Temperature/core temperature
Some functions have a preset recom-
mended temperature. The recom-
mended temperature can be altered
within the given range for an individual
cooking program, a program stage, or
for every time that program is used (see
“Recommended temperatures” under
“Settings”).
The core temperature can also be al-
tered within the given range for an indi-
vidual program or a specific program
stage.
Moisture
The
Combi Steam
 
operating mode
and
Reheat
 Special Mode use a combi-
nation of oven heat and moisture. The
moisture level can be selected within
the given range for an individual pro-
gram or a specific program stage.
Depending on the moisture setting,
moisture or fresh air is supplied to the
oven compartment. With the moisture
setting = 0%, the maximum fresh air
supply is implemented and no moisture
is supplied. With the moisture set-
ting = 100%, there is no fresh air supply
and the moisture content is at its maxi-
mum.
Some food gives off moisture during
the cooking process. This moisture
from the food affects the amount of ad-
ditional moisture needed. If the required
amount of moisture is low, the steam
generator may not be activated at all.