Miele DGC 7585 Operating and Installation instructions - Page 65
Operation, You will see the temperature rising
View all Miele DGC 7585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Operation Malfunction due to missing floor filter. If the floor filter is missing, food deposits can get into the drain. The water cannot be pumped away. Before each cooking program, check that the filter in the floor of the oven compartment is correctly fitted. Turn the steam oven on. The main menu will appear. Place the food in the oven. Select Operating Modes . Select the operating mode you want to use. The operating mode and recommended values for temperature and moisture (if applicable) appear. Change the recommended values if necessary. After the cooking program, select Finish. The steam-reduction function will turn on automatically at the end of a cooking program which uses a temperature of over approx. 175°F (80°C) (steam cooking) or 175-212°F (80-100°C) and 100% moisture (Combi-Steam). Wait until Steam reduction goes out in the display before opening the door. Take the food out of the oven. The recommended values will be automatically accepted within a few seconds. You can change the temperature and moisture level later by selecting the temperature or moisture indicator. Confirm with OK. The required and the actual temperature will appear and the preheating phase will begin. You will see the temperature rising on the display. An audible signal will sound when the set temperature is reached for the first time. 65