Netgear M4100-50G CLI Manual - Page 132
DHCP Snooping Configuration Commands, show dhcp client vendor-id-option, ip dhcp snooping
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
ProSafe M4100 and M7100 Managed Switches show dhcp client vendor-id-option Use this command to display the configured administration mode of the vendor-id-option and the vendor-id string to be included in Option-43 in DHCP requests. Format Mode show dhcp client vendor-id-option Privileged EXEC Example: The following shows example CLI display output for the command. (switch) #show dhcp client vendor-id-option DHCP Client Vendor Identifier Option Enabled DHCP Client Vendor Identifier Option string .... Client. DHCP Snooping Configuration Commands This section describes commands you use to configure DHCP Snooping. ip dhcp snooping Use this command to enable DHCP Snooping globally. Default Format Mode disabled ip dhcp snooping Global Config no ip dhcp snooping Use this command to disable DHCP Snooping globally. Format Mode no ip dhcp snooping Global Config ip dhcp snooping vlan Use this command to enable DHCP Snooping on a list of comma-separated VLAN ranges. Default Format Mode disabled ip dhcp snooping vlan Global Config Switching Commands 132