Netgear M4100-50G CLI Manual - Page 38
spanning-tree mst vlan
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ProSafe M4100 and M7100 Managed Switches are masked according to the 802.1s specification. This causes the priority to be rounded down to the next lower valid priority. Default Format Mode 32768 spanning-tree mst priority Global Config no spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance to the default value. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. If 0 (defined as the default CIST ID) is passed as the , this command sets the Bridge Priority parameter for the Common and Internal Spanning Tree to the default value. Format Mode no spanning-tree mst priority Global Config spanning-tree mst vlan This command adds an association between a multiple spanning tree instance and one or more VLANs so that the VLAN(s) are no longer associated with the Common and Internal Spanning Tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The vlan range can be specified as a list or as a range of values. To specify a list of VLANs, enter a list of VLAN IDs, each separated by a comma with no spaces in between. To specify a range of VLANs, separate the beginning and ending VLAN ID with a dash ("-"). Format Mode spanning-tree mst vlan Global Config no spanning-tree mst vlan This command removes an association between a multiple spanning tree instance and one or more VLANs so that the VLAN(s) are again associated with the Common and Internal Spanning Tree. Format Mode no spanning-tree mst vlan Global Config Switching Commands 38