Netgear M4100-50G CLI Manual - Page 446
cos-queue strict, cos-queue random-detect
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
ProSafe M4100 and M7100 Managed Switches cos-queue strict This command activates the strict priority scheduler mode for each specified queue. Format Modes cos-queue strict [ ... ] • Global Config • Interface Config no cos-queue strict This command restores the default weighted scheduler mode for each specified queue. Format Modes no cos-queue strict [ ... ] • Global Config • Interface Config cos-queue random-detect This command activates weighted random early discard (WRED) for each specified queue on the interface. Specific WRED parameters are configured using the randomdetect queue-parms and the random-detect exponential-weighting-constant commands. When specified in Interface Config' mode, this command affects a single interface only, whereas in Global Config mode, it applies to all interfaces. At least one, but no more than n, queue-id values are specified with this command. Duplicate queue-id values are ignored. Each queue-id value ranges from 0 to (n-1), where n is the total number of queues supported per interface. The number n is platform dependant and corresponds to the number of supported queues (traffic classes). Format Modes cos-queue random-detect queue-id-1 [queue-id-2 ... queue-id-n] • Global Config • Interface Config no cos-queue random-detect Use this command to disable WRED and restore the default tail drop operation for the specified queues on all interfaces or one interface. Format Modes cos-queue random-detect queue-id-1 [queue-id-2 ... queue-id-n] • Global Config • Interface Config Quality of Service (QoS) Commands 446