Netgear M4100-50G CLI Manual - Page 265
area default-cost OSPF, area nssa OSPF, area nssa default-info-originate OSPF, no 1583compatibility
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
ProSafe M4100 and M7100 Managed Switches no 1583compatibility This command disables OSPF 1583 compatibility. Format Mode no 1583compatibility Router OSPF Config area default-cost (OSPF) This command configures the default cost for the stub area. You must specify the area ID and an integer value between 1-16,777,215. Format Mode area default-cost Router OSPF Config area nssa (OSPF) This command configures the specified area id to function as an NSSA. Format Mode area nssa Router OSPF Config no area nssa This command disables nsa from the specified area id. Format Mode no area nssa Router OSPF Config area nssa default-info-originate (OSPF) This command configures the metric value and type for the default route advertised into the NSSA. The optional metric parameter specifies the metric of the default route and is to be in a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-external 2) Format Mode area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPF Config Routing Commands 265