Netgear M4100-50G CLI Manual - Page 37
spanning-tree mst instance, spanning-tree mst priority
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ProSafe M4100 and M7100 Managed Switches If you specify cost, this command sets the path cost for this port within a multiple spanning tree instance or the Common and Internal Spanning Tree instance, depending on the parameter, to the default value, that is, a path cost value based on the Link Speed. If you specify external-cost, this command sets the external path cost for this port for mst '0' instance, to the default value, that is, a path cost value based on the Link Speed. If you specify port-priority, this command sets the priority for this port within a specific multiple spanning tree instance or the Common and Internal Spanning Tree instance, depending on the parameter, to the default value. Format Mode no spanning-tree mst Interface Config spanning-tree mst instance This command adds a multiple spanning tree instance to the switch. The parameter is a number within a range of 1-4094, that corresponds to the new instance ID to be added. The maximum number of multiple instances supported by the switch is 4. Default Format Mode none spanning-tree mst instance Global Config no spanning-tree mst instance This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the Common and Internal Spanning Tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance to be removed. Format Mode no spanning-tree mst instance Global Config spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The priority value is a number within a range of 0-61440 in increments of 4096. If you specify 0 (defined as the default CIST ID) as the , this command sets the Bridge Priority parameter to a new value for the Common and Internal Spanning Tree. The bridge priority value is a number within a range of 0-61440. The twelve least significant bits Switching Commands 37