Netgear M4100-50G CLI Manual - Page 673
snmp-server community ro, snmp-server enable traps violation
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 673 highlights
ProSafe M4100 and M7100 Managed Switches snmp-server community ro Use this command to restrict access to switch information. The access mode is read-only (also called public). Format Mode snmp-server community ro Global Config snmp-server community rw Use this command to restrict access to switch information. The access mode is read/write (also called private). Format Mode snmp-server community rw Global Config snmp-server enable traps violation Use this command to enable sending new violation traps designating when a packet with a disallowed MAC address is received on a locked port. Note: For other port security commands, see Protected Ports Commands on page 64. Default Format Mode disabled snmp-server enable traps violation Interface Config no snmp-server enable traps violation Use this command to disable sending new violation traps. Format Mode no snmp-server enable traps violation Interface Config snmp-server enable traps Use this command to enable the Authentication Flag. Default enabled Management Commands 673