Netgear M4100-50G CLI Manual - Page 514
boot host auto-save, boot autoinstall start, boot host retry-count
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 514 highlights
ProSafe M4100 and M7100 Managed Switches boot host auto-save This command is used to enable automatically saving the downloaded configuration on the switch. Default Format Mode Disabled boot host auto-save Privileged EXEC no boot host auto-save This command is used to disable automatically saving the downloaded configuration on the switch. Format Mode no boot host auto-save Privileged EXEC boot autoinstall start The command is used to start Auto Install on the switch. Auto Install tries to download a config file from a TFTP server. Format Mode boot autoinstall start Privileged EXEC boot autoinstall stop The command is used to A user might terminate the Auto Install process at any time prior to the downloading of the config file. This is most optimally done when the switch is disconnected from the network, or if the requisite configuration files have not been configured on TFTP servers. Termination of the Auto Install process ends further periodic requests for a host-specific file. Format Mode boot autoinstall stop Privileged EXEC boot host retry-count This command is used to set the number of attempts to download a configuration. The valid range is from 1 to 6. Default Format Mode 3 boot host retry-count Privileged EXEC Utility Commands 514