Netgear M4100-50G CLI Manual - Page 402
Routers ASBR. This command takes no options.
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
ProSafe M4100 and M7100 Managed Switches Term Definition Stub Mode Represents whether the specified Area is a stub area or not. The possible values are enabled and disabled. This is a configured value. Import Summary LSAs Shows whether to import summary LSAs (enabled). OSPF Stub Metric Value The metric value of the stub area. This field displays only if the area is a configured as a stub area. The following OSPF NSSA-specific information displays only if the area is configured as an NSSA. Term Definition Import Summary LSAs Shows whether to import summary LSAs into the NSSA. Redistribute into NSSA Shows whether to redistribute information into the NSSA. Default Information Originate Shows whether to advertise a default route into the NSSA. Default Metric The metric value for the default route advertised into the NSSA. Default Metric Type The metric type for the default route advertised into the NSSA. Translator Role The NSSA translator role of the ABR, which is always or candidate. Translator Stability Interval The amount of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. show ipv6 ospf asbr This command displays the internal OSPFv3 routes to reach Autonomous System Boundary Routers (ASBR). This command takes no options. Format Modes show ipv6 ospf asbr • Privileged EXEC • User EXEC Term Type Router ID Definition The type of the route to the destination. It can be either: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. IPv6 Commands 402