Netgear M4100-50G CLI Manual - Page 322
no ip mcast boundary, no ip multicast, ip multicast ttl-threshold
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
ProSafe M4100 and M7100 Managed Switches no ip mcast boundary This command deletes an administrative scope multicast boundary specified by and for which this multicast administrative boundary is applicable. is a group IP address and is a group IP mask. Format Mode no ip mcast boundary Interface Config ip multicast This command sets the administrative mode of the IP multicast forwarder in the router to active. Default Format Mode disabled ip multicast Global Config no ip multicast This command sets the administrative mode of the IP multicast forwarder in the router to inactive. Format Mode no ip multicast Global Config ip multicast ttl-threshold This command is specific to IPv4. Use this command to apply the given Time-to-Live threshold value to a routing interface. The is the TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the interface. This command sets the Time-to-Live threshold value such that any data packets forwarded over the interface having TTL value below the configured value are dropped. The value for ranges from 0 to 255. Default Format Mode 1 ip multicast ttl-threshold Interface Config IP Multicast Commands 322