Netgear M4100-50G CLI Manual - Page 385
area nssa default-info-originate OSPFv3, area nssa no-redistribute OSPFv3, no area nssaOSPFv3
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 385 highlights
ProSafe M4100 and M7100 Managed Switches no area nssa(OSPFv3) This command disables nssa from the specified area id. Format Mode no area nssa Router OSPFv3 Config area nssa default-info-originate (OSPFv3) This command configures the metric value and type for the default route advertised into the NSSA. The optional metric parameter specifies the metric of the default route and is to be in a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-external 2). Format Mode area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPFv3 Config no area nssa default-info-originate (OSPFv3) This command disables the default route advertised into the NSSA. Format Mode no area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPF Config area nssa no-redistribute (OSPFv3) This command configures the NSSA ABR so that learned external routes will not be redistributed to the NSSA. Format Mode area nssa no-redistribute Router OSPFv3 Config no area nssa no-redistribute (OSPFv3) This command disables the NSSA ABR so that learned external routes are redistributed to the NSSA. Format Mode no area nssa no-redistribute Router OSPF Config IPv6 Commands 385