Netgear M4100-50G CLI Manual - Page 432
ipv6 mld router, ipv6 mld query-interval, ipv6 mld query-max-response-time
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
ProSafe M4100 and M7100 Managed Switches network. In this situation, the 7000 series has an IGMP/MLD Snooping Querier running on one of the switches and Snooping enabled on all the switches. For more information, see IGMP Snooping Configuration Commands on page 146 and MLD Snooping Commands on page 158. ipv6 mld router Use this command, in the administrative mode of the router, to enable MLD in the router. Default Format Mode Disabled ipv6 mld router • Global Config • Interface Config no ipv6 mld router Use this command, in the administrative mode of the router, to disable MLD in the router. Default Format Mode Disabled no ipv6 mld router • Global Config • Interface Config ipv6 mld query-interval Use this command to set the MLD router's query interval for the interface. The query-interval is the amount of time between the general queries sent when the router is the querier on that interface. The range for is 1-3,600 seconds. Default Format Mode 125 ipv6 mld query-interval Interface Config no ipv6 mld query-interval Use this command to reset the MLD query interval to the default value for that interface. Format Mode no ipv6 mld query-interval Interface Config ipv6 mld query-max-response-time Use this command to set the MLD querier's maximum response time for the interface and this value is used in assigning the maximum response time in the query messages that are IPv6 Multicast Commands 432