Netgear M4100-50G CLI Manual - Page 25
show port advertise, show port
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ProSafe M4100 and M7100 Managed Switches show port advertise Use this command to display the local administrative link advertisement configuration, local operational link advertisement, and the link partner advertisement for an interface. It also displays priority Resolution for speed and duplex as per 802.3 Annex 28B.3. It displays the autonegotiation state, Phy Master/Slave Clock configuration, and Link state of the port. If the link is down, the Clock is displayed as No Link, and a dash is displayed against the Oper Peer advertisement, and Priority Resolution. If autonegotiation is disabled, the admin Local Link advertisement, operational local link advertisement, operational peer advertisement, and Priority resolution fields are not displayed. If this command is executed without the optional slot/port parameter, it displays the autonegotiation state and operational Local link advertisement for all the ports. Operational link advertisement will display speed only if it is supported by both local as well as link partner. If autonegotiation is disabled, operational local link advertisement is not displayed. Format Mode show port advertise [slot/port] Privileged EXEC Example: The following commands show the command output with and without the optional parameter: (switch)#show port advertise 0/1 Port: 0/1 Type: Gigabit - Level Link State: Down Auto Negotiation: Enabled Clock: Auto 1000f 1000h 100f 100h 10f 10h Admin Local Link Advertisement no no yes no yes no Oper Local Link Advertisement no no yes no yes no Oper Peer Advertisement no no yes yes yes yes Priority Resolution - - yes - - - (Netgear Switch)#show port advertise Port Type Neg Operational Link Advertisement 0/1 Gigabit - Level Enabled 1000f, 100f, 100h, 10f, 10h 0/2 Gigabit - Level Enabled 1000f, 100f, 100h, 10f, 10h 0/3 Gigabit - Level Enabled 1000f, 100f, 100h, 10f, 10h show port This command displays port information. Format Mode show port { | all} Privileged EXEC Switching Commands 25