Netgear M4100-50G CLI Manual - Page 704
network ipv6 address, network ipv6 gateway
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 704 highlights
ProSafe M4100 and M7100 Managed Switches network ipv6 address Use this command to configure an IPv6 global address, enable or disable stateless global address autoconfiguration, and enable or disable dhcpv6 client protocol information for the network port. You can configure multiple IPv6 addresses on the network port. Format Mode network ipv6 address {address/prefix-length [eui64] | autoconfig | dhcp} Privileged EXEC Term address prefix-length eui64 autoconfig dhcp Definition IPv6 prefix in IPv6 global address format. IPv6 prefix length value. Formulate IPv6 address in eui64 format. Configure stateless global address autoconfiguration capability. Configure dhcpv6 client protocol. no network ipv6 address Use this command to: • Remove the manually configured IPv6 global address on the network port interface (with the address option). • Disable the stateless global address autoconfiguration on the network port (with the autoconfig option). • Disable the dhcpv6 client protocol on the network port (with the dhcp option). Format Mode no network ipv6 address {address/prefix-length [eui64] | autoconfig | dhcp} Privileged EXEC network ipv6 gateway Use this command to configure IPv6 gateway (default routers) information for the network port. The gateway address is in IPv6 global or link-local address format. Format Mode network ipv6 gateway Privileged EXEC Management Commands 704