Netgear M4100-50G CLI Manual - Page 403
show ipv6 ospf database, link state ID LSID. Use
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
ProSafe M4100 and M7100 Managed Switches Term Cost Area ID Next Hop Next Hop Intf Definition Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ipv6 ospf database This command displays information about the link state database when OSPFv3 is enabled. If you do not enter any parameters, the command displays the LSA headers for all areas. Use the optional parameter to display database information about a specific area. Use the other optional parameters to specify the type of link state advertisements to display. Use external to display the external LSAs. Use inter-area to display the inter-area LSAs. Use link to display the link LSAs. Use network to display the network LSAs. Use nssa-external to display NSSA external LSAs. Use prefix to display intra-area Prefix LSAs. Use router to display router LSAs. Use unknown area, unknown as, or unknown link to display unknown area, AS, or link-scope LSAs, respectively. Use to specify the link state ID (LSID). Use adv-router to show the LSAs that are restricted by the advertising router. Use self-originate to display the LSAs in that are self originated. The information below is only displayed if OSPF is enabled. Format Modes show ipv6 ospf [] database [{external | inter-area {prefix | router} | link | network | nssa-external | prefix | router | unknown {area | as | link}}] [] [{adv-router [] | self-originate}] • Privileged EXEC • User EXEC For each link-type and area, the following information is displayed. Term Link Id Adv Router Age Sequence Checksum Options Rtr Opt Definition A number that uniquely identifies an LSA that a router originates from all other self originated LSAs of the same LS type. The Advertising Router. Is a 32 bit dotted decimal number representing the LSDB interface. A number representing the age of the link state advertisement in seconds. A number that represents which LSA is more recent. The total number LSA checksum. An integer indicating that the LSA receives special handling during routing calculations. Router Options are valid for router links only. IPv6 Commands 403