Netgear M4100-50G CLI Manual - Page 530
show mbuf total, show running-config
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 530 highlights
ProSafe M4100 and M7100 Managed Switches bcmCNTR.0 bcmLINK.0 DHCP snoop Dynamic ARP Inspection dot1s_timer_task dhcpsPingTask 0.20% 0.35% 0.10% 0.10% 0.10% 0.20% show mbuf total This command shows the total system buffer pools status. Format Mode show mbuf total Privileged EXEC The following shows an example of CLI display output for the command. (switch) #show mbuf total mbufSize 9284 (0x2444) Current Time 0x1897fa MbufsFree 150 MbufsRxUsed 0 Total Rx Norm Alloc Attempts 26212 Total Rx Mid2 Alloc Attempts 4087 Total Rx Mid1 Alloc Attempts 188943 Total Rx High Alloc Attempts 384555 Total Tx Alloc Attempts 2478536 Total Rx Norm Alloc Failures 0 Total Rx Mid2 Alloc Failures 0 Total Rx Mid1 Alloc Failures 0 Total Rx High Alloc Failures 0 Total Tx Alloc Failures 0 show running-config Use this command to display or capture the current setting of different protocol packages supported on the switch. This command displays or captures commands with settings and configurations that differ from the default value. To display or capture the commands with settings and configurations that are equal to the default value, include the [all] option. Note: Show running-config does not display the User Password, even if you set one different from the default. The output is displayed in the script format, which can be used to configure another switch with same configuration. If the optional is provided with a file name extension of ".scr", the output is redirected to a script file. Utility Commands 530