Netgear M4100-50G CLI Manual - Page 576
ip domain lookup, ip domain name
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 576 highlights
ProSafe M4100 and M7100 Managed Switches ip domain lookup Use this command to enable the DNS client. Default Format Mode enabled ip domain lookup Global Config no ip domain lookup Use this command to disable the DNS client. Format Mode no ip domain lookup Global Config ip domain name Use this command to define a default domain name that the software uses to complete unqualified host names (names with a domain name). By default, no default domain name is configured in the system. may not be longer than 255 characters and should not include an initial period. This should be used only when the default domain name list, configured using the ip domain list command, is empty. Default Format Mode none ip domain name Global Config Example: The CLI command ip domain name yahoo.com will configure yahoo.com as a default domain name. For an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to xxx.yahoo.com. no ip domain name Use this command to remove the default domain name configured using the ip domain name command. Format Mode no ip domain name Global Config ip domain list Use this command to define a list of default domain names to complete unqualified names. By default, the list is empty. Each name must be no more than 256 characters, and should not include an initial period. The default domain name, configured using the ip domain Utility Commands 576