Netgear M4100-50G CLI Manual - Page 540
logging email urgent, logging email message-type to-addr, no logging email
![]() |
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 540 highlights
ProSafe M4100 and M7100 Managed Switches Format Mode logging email [] Global Config no logging email This command disables email alerting. Format Mode no logging email Global Config logging email urgent This command sets the lowest severity level at which log messages are emailed immediately in a single email message. Specify the severitylevel value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Specify none to indicate that log messages are collected and sent in a batch email at a specified interval. Default Format Mode Alert (1) and emergency (0) messages are sent immediately logging email urgent { | none } Global Config no logging email urgent This command resets the urgent severity level to the default value. Format Mode no logging email urgent Global Config logging email message-type to-addr This command configures the email address to which messages are sent. The message types supported are urgent, non-urgent, and both. For each supported severity level, multiple email addresses can be configured. The to-email-addr variable is a standard email address, for example [email protected]. Format Mode logging email message-type {urgent |non-urgent |both} to-addr Global Config Utility Commands 540
![](/manual_guide/products/netgear-m4100d10poe-cli-manual-76e4515/540.png)