Netgear M4100-50G CLI Manual - Page 320
ip icmp error-interval, no ip icmp echo-reply
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
ProSafe M4100 and M7100 Managed Switches no ip icmp echo-reply Use this command to prevent the generation of ICMP Echo Reply messages by the router. Format Mode no ip icmp echo-reply Global Config ip icmp error-interval Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate limit is configured as a token bucket, with two configurable parameters, burst-size and burst-interval. The burst-interval specifies how often the token bucket is initialized with burst-size tokens. burst-interval is from 0 to 2147483647 milliseconds (msec). The burst-size is the number of ICMP error messages that can be sent during one burst-interval. The range is from 1 to 200 messages. To disable ICMP rate limiting, set burst-interval to zero (0). Default Format Mode • burst-interval of 1000 msec. • burst-size of 100 messages ip icmp error-interval [] Global Config no ip icmp error-interval Use the no form of the command to return burst-interval and burst-size to their default values. Format Mode no ip icmp error-interval Global Config Routing Commands 320