Netgear M4100-50G CLI Manual - Page 589
debug ip acl, debug ip dvmrp packet, no debug igmpsnooping receive
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 589 highlights
ProSafe M4100 and M7100 Managed Switches Parameter Type Group Definition The type of IGMP packet. Type can be one of the following: • Membership_Query - IGMP Membership Query • V1_Membership_Report - IGMP Version 1 Membership Report • V2_Membership_Report - IGMP Version 2 Membership Report • V3_Membership_Report - IGMP Version 3 Membership Report • V2_Leave_Group - IGMP Version 2 Leave Group Multicast group address in the IGMP header. no debug igmpsnooping receive This command disables tracing of received IGMP Snooping packets. Format Mode no debug igmpsnooping receive Privileged EXEC debug ip acl Use this command to enable debug of IP Protocol packets matching the ACL criteria. Default Format Mode disabled debug ip acl Privileged EXEC no debug ip acl Use this command to disable debug of IP Protocol packets matching the ACL criteria. Format Mode no debug ip acl Privileged EXEC debug ip dvmrp packet Use this command to trace DVMRP packet reception and transmission. receive traces only received DVMRP packets and transmit traces only transmitted DVMRP packets. When neither keyword is used in the command, then all DVMRP packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default Format Mode disabled debug ip dvmrp packet [receive|transmit] Privileged EXEC Utility Commands 589