Netgear M4100-50G CLI Manual - Page 483
This command displays an IP ACL, is the number used to identify, the IP ACL.
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
ProSafe M4100 and M7100 Managed Switches show ip access-lists This command displays an IP ACL is the number used to identify the IP ACL. Format Mode show ip access-lists Privileged EXEC Note: Only the access list fields that you configure are displayed. Term Definition Rule Number The number identifier for each rule that is defined for the IP ACL. Action The action associated with each rule. The possible values are Permit or Deny. Match All Indicates whether this access list applies to every packet. Possible values are True or False. Protocol The protocol to filter for this rule. Source IP Address The source IP address for this rule. Source IP Mask The source IP Mask for this rule. Source L4 Port Keyword The source port for this rule. Destination IP Address The destination IP address for this rule. Destination IP The destination IP Mask for this rule. Mask Destination L4 Port Keyword The destination port for this rule. IP DSCP The value specified for IP DSCP. IP Precedence The value specified IP Precedence. IP TOS The value specified for IP TOS. Log Displays when you enable logging for the rule. Assign Queue The queue identifier to which packets matching this rule are assigned. Mirror Interface The slot/port to which packets matching this rule are copied. Redirect Interface The slot/port to which packets matching this rule are forwarded. Time Range Name Displays the name of the time-range if the ACL rule has referenced a time range. Rule Status Status (Active/Inactive) of the ACL rule. Quality of Service (QoS) Commands 483