Netgear M4100-50G CLI Manual - Page 169
set mld querier query_interval, set mld querier timer expiry, no set mld querier
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
ProSafe M4100 and M7100 Managed Switches no set mld querier Use this command to disable MLD Snooping Querier on the system. Use the optional parameter address to reset the querier address. Format Mode no set mld querier [vlan-id][address] • Global Config • VLAN Mode set mld querier query_interval Use this command to set the MLD Querier Query Interval time. This is the amount of time in seconds that the switch waits before sending another general query. Default Format Mode disabled set mld querier query_interval Global Config no set mld querier query_interval Use this command to set the MLD Querier Query Interval time to its default value. Format Mode no set mld querier query_interval Global Config set mld querier timer expiry Use this command to set the MLD Querier timer expiration period. This is the time period that the switch remains in Non-Querier mode once it discovers that there is a Multicast Querier in the network. Default Format Mode 60 seconds set mld querier timer expiry Global Config no set mld querier timer expiry Use this command to set the MLD Querier timer expiration period to its default value. Format Mode no set mld querier timer expiry Global Config Switching Commands 169