Netgear M4100-50G CLI Manual - Page 39
spanning-tree port mode
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ProSafe M4100 and M7100 Managed Switches spanning-tree port mode This command sets the Administrative Switch Port State for this port to enabled. Default Format Mode enabled spanning-tree port mode Interface Config no spanning-tree port mode This command sets the Administrative Switch Port State for this port to disabled. Format Mode no spanning-tree port mode Interface Config spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to enabled. Default Format Mode enabled spanning-tree port mode all Global Config no spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to disabled. Format Mode no spanning-tree port mode all Global Config spanning-tree edgeport all This command specifies that every port is an Edge Port within the Common and Internal Spanning Tree. This allows all ports to transition to Forwarding State without delay. Format Mode spanning-tree edgeport all Global Config no spanning-tree edgeport all This command disables Edge Port mode for all ports within the Common and Internal Spanning Tree. Format Mode no spanning-tree edgeport all Global Config Switching Commands 39