Netgear M4100-50G CLI Manual - Page 569
netbios-node-type, next-server, option
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 569 highlights
ProSafe M4100 and M7100 Managed Switches netbios-node-type The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP) clients. type specifies the NetBIOS node type. Valid types are: • b-node-Broadcast • p-node-Peer-to-peer • m-node-Mixed • h-node-Hybrid (recommended) Default Format Mode none netbios-node-type DHCP Pool Config no netbios-node-type This command removes the NetBIOS node Type. Format Mode no netbios-node-type DHCP Pool Config next-server This command configures the next server in the boot process of a DHCP client.The parameter is the IP address of the next server in the boot process, which is typically a TFTP server. Default Format Mode inbound interface helper addresses next-server DHCP Pool Config no next-server This command removes the boot server list. Format Mode no next-server DHCP Pool Config option The option command configures DHCP Server options. The parameter specifies the DHCP option code and ranges from 1-254. The parameter specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. The hex parameter specifies hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a Utility Commands 569