Netgear M4100-50G CLI Manual - Page 317

ProSafe M4100 and M7100 Managed Switches show ip rip This command displays information relevant to the RIP router. Format Modes show ip rip • Privileged EXEC • User EXEC Term Definition RIP Admin Mode Enable or disable. Split Horizon Mode None, simple or poison reverse. Auto Summary Enable or disable. If enabled, groups of adjacent routes are summarized into single Mode entries, in order to reduce the total number of entries The default is enable. Host Routes Accept Mode Enable or disable. If enabled the router accepts host routes. The default is enable. Global Route Changes The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age. Global queries The number of responses sent to RIP queries from other systems. Default Metric The default metric of redistributed routes if one has already been set, or blank if not configured earlier. The valid values are 1-15. Default Route Advertise The default route. show ip rip interface brief This command displays general information for each RIP interface. For this command to display successful results routing must be enabled per interface (that is, ip rip). Format Modes show ip rip interface brief • Privileged EXEC • User EXEC Term Definition Interface Valid slot and port number separated by forward slashes. IP Address The IP source address used by the specified RIP interface. Send Version The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-1, RIP-1c, or RIP-2. Receive Version The RIP version(s) allowed when receiving updates from the specified interface. The types are none, RIP-1, RIP-2, or Both Routing Commands 317