Netgear M4100-50G CLI Manual - Page 593
debug ipv6 mld packet, debug ipv6 pimdm packet, debug ipv6 pimsm packet
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 593 highlights
ProSafe M4100 and M7100 Managed Switches debug ipv6 mld packet Use this command to trace MLDv6 packet reception and transmission. receive traces only received MLDv6 packets and transmit traces only transmitted MLDv6 packets. When neither keyword is used in the command, then all MLDv6 packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default Format Mode disabled debug ipv6 mld packet [receive|transmit] Privileged EXEC no debug ipv6 mld packet Use this command to disable debug tracing of MLDv6 packet reception and transmission. Format Mode no debug ipv6 mld packet [receive|transmit] Privileged EXEC debug ipv6 pimdm packet Use this command to trace PIMDMv6 packet reception and transmission. receive traces only received PIMDMv6 packets and transmit traces only transmitted PIMDMv6 packets. When neither keyword is used in the command, then all PIMDMv6 packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default Format Mode disabled debug ipv6 pimdm packet [receive|transmit] Privileged EXEC no debug ipv6 pimdm packet Use this command to disable debug tracing of PIMDMv6 packet reception and transmission. debug ipv6 pimsm packet Use this command to trace PIMSMv6 packet reception and transmission. receive traces only received PIMSMv6 packets and transmit traces only transmitted PIMSMv6 packets. When neither keyword is used in the command, then all PIMSMv6 packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default disabled Utility Commands 593