Netgear M4100-50G CLI Manual - Page 223

ProSafe M4100 and M7100 Managed Switches ip proxy-arp This command enables proxy ARP on a router interface. Without proxy ARP, a device only responds to an ARP request if the target IP address is an address configured on the interface where the ARP request arrived. With proxy ARP, the device might also respond if the target IP address is reachable. The device responds only if all next hops in its route to the destination are through interfaces other than the interface that received the ARP request. Default Format Mode enabled ip proxy-arp Interface Config no ip proxy-arp This command disables proxy ARP on a router interface. Format Mode no ip proxy-arp Interface Config arp cachesize This command configures the ARP cache size. The ARP cache size value is a platform-specific integer value. The default size also varies depending on the platform. Format Mode arp cachesize Global Config no arp cachesize This command configures the default ARP cache size. Format Mode no arp cachesize Global Config arp dynamicrenew This command enables the ARP component to automatically renew dynamic ARP entries when they age out. Default Format Mode enabled arp dynamicrenew Privileged EXEC Routing Commands 223