Netgear M4100-50G CLI Manual - Page 565
IP address 0.0.0.0 is invalid.
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
ProSafe M4100 and M7100 Managed Switches client-name This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters. Default Format Mode none client-name DHCP Pool Config no client-name This command removes the client name. Format Mode no client-name DHCP Pool Config default-router This command specifies the default router list for a DHCP client. {address1, address2... address8} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none default-router [....] DHCP Pool Config no default-router This command removes the default router list. Format Mode no default-router DHCP Pool Config dns-server This command specifies the IP servers available to a DHCP client. Address parameters are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none dns-server [....] DHCP Pool Config Utility Commands 565