Netgear M4100-50G CLI Manual - Page 192
Model Name, Serial Number
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
ProSafe M4100 and M7100 Managed Switches Term Definition Device Class Shows the device class as advertized by the device remotely connected to the port. Network Policy Shows if network policy TLV is received in the LLDP frames on this port. Information Media Application Type Shows the application type. Types of applications are unknown, voice, voicesignaling, guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo, videosignaling. VLAN Id Shows the VLAN id associated with a particular policy type. Priority Shows the priority associated with a particular policy type. DSCP Shows the DSCP associated with a particular policy type. Unknown Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are ignored. Tagged Indicates if the policy type is using tagged or untagged VLAN. Hardware Revision Shows the hardware version of the remote device. Firmware Revision Shows the firmware version of the remote device. Software Revision Shows the software version of the remote device. Serial Number Shows the serial number of the remote device. Manufacturer Name Shows the manufacture name of the remote device. Model Name Shows the model name of the remote device. Asset ID Shows the asset id of the remote device. Sub Type Shows the type of location information. Location Information Shows the location information as a string for a given type of location id Device Type Shows the remote device's PoE device type connected to this port. Available Shows the remote port's PSE power value in tenths of a watt. Source Shows the remote port's PSE power source. Priority Shows the remote port's PSE priority. Required Shows the remote port's PD power requirement. Source Shows the remote port's PD power source. Priority Shows the remote port's PD power priority. Example: The following shows example CLI display output for the command. (Switch) #show lldp med remote-device detail 0/8 Switching Commands 192