Ricoh Aficio SG 3110DN User Guide - Page 140

4. Machine Setup Menus Using the [Host Interface] Menu In the [Host Interface] menu, you can specify settings related to connection and communication. Settings made using the [Host Interface] menu remain effective even if you turn the machine off. To configure the machine's network settings, use the [Network Setup] menu. I/O Timeout Specify how long the printer waits for the currently-connected interface to respond. When the specified time elapses, the machine can receive data from another interface. If you make the I/O Timeout period too short, timeout might occur while data transfer is in progress. If this happens, the print job will be interrupted by a new job from another interface. You can specify a timeout between 10 and 60 seconds. Default: [15 seconds] Network Setup You can make network-related settings. Machine Name Displays the machine's name. Host Name Displays the machine's host name. Domain Name Displays the machine's domain name. IPv4 DNS Specify the DNS server settings under IPv4. If DHCP is off, enter the IPv4 addresses for the primary and secondary DNS servers in the format "xxx.xxx.xxx.xxx" (where each x represents a digit). Default: [0.0.0.0] IPv4 DDNS Specify the setting to update the host or domain name. Default: [On] DHCP You can specify whether or not to use DHCP in an IPv4 environment. Default: [On] IPv4 Address You can specify the machine's IPv4 address. When DHCP is set to on, the IP address cannot be changed. To change it, set DHCP to off. 138