Ricoh Aficio SG 3110DN User Guide - Page 141
IPv4 Subnet M., IPv4 Gatewy.Ad., IPv6 DDNS, DHCPv6, IPv6 Statlss Ad, IPv6 Address, Active Protocol
View all Ricoh Aficio SG 3110DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Using the [Host Interface] Menu Contact your network administrator for information about the network configuration. Default: [11.22.33.44] IPv4 Subnet M. You can specify the subnet mask. When DHCP is set to on, the subnet mask cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: [0.0.0.0] IPv4 Gatewy.Ad. You can specify the IPv4 gateway address. When DHCP is set to on, the gateway address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: [0.0.0.0] IPv6 DDNS Specify the setting to update the host or domain name. Default: [On] IPv6 DNS Specify the DNS server settings under IPv6. If DHCP is off, enter the IPv6 addresses for the primary and secondary DNS servers in the form "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" (where each x represents a digit). Default: Blank DHCPv6 You can specify whether or not to use DHCP in an IPv6 environment. Default: [Off] IPv6 Statlss Ad Select whether to enable or disable IPv6 stateless address auto configuration. Default: [On] IPv6 Address You can specify the machine's IPv6 address. IPv6 Gatewy.Ad. You can specify the IPv6 gateway address. Active Protocol Select the protocol by setting the IPv4, IPv6, HTTP (IPv4), HTTP (IPv6), and Web protocols to [Active] or [Not Active]. Default: [Active] 139