Ricoh Aficio SP 9100DN Software Guide - Page 162

4. Making Printer Settings Using the Control Panel PS Menu You can set conditions when using Postscript for printing. Changing the PS menu Follow the procedure below to change the setting for date format. 1. Press the [Menu] key. The [Menu] screen appears. 4 2. Press the [ ] or [ ] key to display [PS Menu], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to display [Data Format], and then press the [ Enter] key. 4. Press the [ ] or [ ] key to select [TBCP], and then press the [ Enter] key. Wait two seconds. The [Data Format] screen appears. 5. Press the [Online] key. The initial screen appears. PS Menu parameters This section explains about parameters that can be set on the Postscript menu. Data Format You can select the data format. • Binary Data • TBCP This setting is effective when using a parallel, USB, or EtherTalk connection. When you use a parallel or USB connection, the print job is canceled if binary data is sent from the printer driver. When you use an Ethernet connection, the print job is canceled if: • The printer driver data format is TBCP and the data format selected using the control panel is Binary Data. • The printer driver data format is binary and the data format selected using the control panel is TBCP. • Default: TBCP Resolution 160