Ricoh Aficio SP 9100DN Software Guide - Page 245

Message List Message List This is a list of messages that appear in the printer's system log. The system log can be viewed using the "syslog" command. System Log Information Use the following command to display the system log information: • UNIX: Use the "syslog" command and "rsh", "rcp", "ftp", and "sftp" parameters. • telnet : Use the "syslog" command. Message Problem and solutions Access to NetWare server de- (In the print server mode) Login to the file server nied. Either there is no account for this print server failed. Make sure that the print server is registered 5 on the NetWare server or the password was in- on the file server. If a password is specified for the correct. print server, delete it. account is unavailable: Same account name be used. User account is disabled. This could be because it use the same account name as the administrator account. account is unavailable: The authentication password is not set up. User account is disabled. This could be because the authentication password is not set, and only the encryption account is set. account is unavailable: encryption is impossible. Encryption is not possible and account is disabled. This could be because: • Security option is not installed. • Encryption password has not been specified. add_sess_IPv4: bad trap, community: The IPv4 address (0.0.0.0.) is unavailable when the community access type is TRAP. Specify the host IPv4 address for the TRAP destination. add_sess_IPv6: bad trap, community: The IPv6 address [::] is unavailable when the community access type is TRAP. Specify the host IPv6 address for the TRAP destination. add_sess_IPv4: community al- The same community name already exists. Use an- ready defined. other community name. 243