Ricoh Aficio SP 9100DN Software Guide - Page 258
Using Pure IP in the NetWare 5/5.1 or 6/6.5 Environment
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
6. Using a Printer Server • NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log on to. Use up to 32 alphanumeric characters. • NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127 characters. • Operation Mode: Specify whether to use the interface board as a print server or a remote printer. • Remote Printer No.: This item is effective when the interface board is specified as a remote printer. Enter the same number as the number of the printer to be created on the print server (0 to 254 characters). • Job Timeout: When the interface board is used as a NetWare remote printer, the printer cannot detect when a print job ends. Therefore, the printer terminates printing when a certain period of time has elapsed since it last received print data (i.e., when it has not received print data for a certain period of time). Specify here this period of time (3 to 255 seconds). The initial value is 15 (seconds). • Frame Type: Select the frame type from the drop-down menu. • Print Server Protocol: Select the protocol for NetWare from the drop-down menu. 6 • NCP Delivery Protocol: Select the protocol for NCP delivery. 5. Confirm the settings, and then click [OK]. Configuration is now complete. Wait several minutes before restarting Web Image Monitor. 6. Click [Logout]. • To check that the configuration is made correctly, enter the following from the command prompt. F:> NLIST USER/A/B • If the printer works as configured, the name of the print server appears as a connected user. • If you cannot identify the printer you want to configure, check the printer name with the config- uration page printed from the printer. For details about printing a configuration page, see p. 137 "List/Test Print Menu". • If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer. Using Pure IP in the NetWare 5/5.1 or 6/6.5 Environment Follow the procedure below to connect the printer as a print server in a pure IP environment of NetWare 5/5.1. • When creating a queued print server in a pure IP environment of NetWare 5/5.1 or NetWare 6.0, create a print queue on the file server using NetWare Administrator. 256