Ricoh Aficio SP 9100DN Software Guide - Page 195
appletalk, autonet, on} means active and {off} means inactive.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Remote Maintenance by telnet • Up to five access ranges can be specified. The entry is invalid if the target number is omitted. • You cannot send print jobs, or access Web Image Monitor and diprint from a restricted IP address. appletalk Use the "appletalk" command to view and configure Appletalk parameters. View settings msh> appletalk • [2] means "active" and [0] means "inactive". • The default is [2]. Changing PAP timeout configuration msh> appletalk ptimeout value > 0 • Timeout value becomes effective. 5 msh> appletalk ptimeout value = 0 • Timeout value becomes ineffective. autonet Use the "autonet" command to view and configure AutoNet parameters. View settings The following command displays the current AutoNet settings: msh> autonet Configuration You can configure AutoNet settings. msh> autonet {on|off} • {on} means "active" and {off} means "inactive". Current interface priority configuration display msh> autonet priority Interface priority configuration msh> autonet priority "interface_name" • You can give interface's AutoNet parameter priority. • Priority settings are available when multiple interfaces are installed. • wlan can be specified only when the IEEE 802.11b interface unit is installed. 193