Ricoh Aficio SP 9100DN Software Guide - Page 204
info, ipp, Use IPP user authorization to restrict users to print with IPP. The default is off.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
5. Monitoring and Configuring the Printer • The IP address, subnet mask and broadcast address are the same as that for the ethernet interface and IEEE 802.11b interface. • TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are changed, the new interface inherits the configuration. • Use "0x" as the initial two letters of a hexadecimal address. info Use the "info" command to display printer information such as paper tray, output tray, and printer language. Printer information display msh> info 5 • For details about displayed contents, see p.224 "Getting Printer Information over the Network". ipp Use the "ipp" command to view and configure IPP settings. Viewing settings The following command displays the current IPP settings: msh> ipp IPP timeout configuration Specify how many seconds the computer waits before canceling an interrupted print job. The time can be entered between 30 to 65535 seconds. msh> ipp timeout [30 - 65535] IPP user authorization configuration Use IPP user authorization to restrict users to print with IPP. The default is "off". msh> ipp auth {basic|digest|off} • User authorization settings are "basic" and "digest". • Use "off" to remove a user's authorization. • If user authorization is specified, register a user name. You can register up to 10 users. IPP user configuration Configure IPP users according to the following messages: msh> ipp user The following message appears: 202