Ricoh Aficio SP 9100DN Software Guide - Page 221
used for packet encoding. 1 is set if a number, is not specified.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Parameter keyphrase "phrase" val {1|2|3|4} encval {1|2|3|4} wepauth [open|shared] rate [auto|11m|5.5m|2m|1m] Remote Maintenance by telnet Value configured Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key, the WEP specified by key phrase is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. Put "0x" on the front of WEP key. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. You can specify the WEP key when entering in ASCII. With a 64-bit WEP, you can use 10 digit hex- 5 adecimals. With a 128-bit WEP, you can use 26 digit hexadecimals. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key phrase, the WEP specified by key is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. You can omit the numbers with "val". The key number is set to 1 when making these omissions. You can specify which of the four WEP keys is used for packet encoding. "1" is set if a number is not specified. You can set an authorization mode when using WEP. The specified value and authorized mode are as follows: open: open system authorized (default) shared: shared key authorized rate You can set the IEEE 802.11b transmitting speed. 219