Ricoh Aficio SP 9100DN Software Guide - Page 248
Interface interface name: Duplicate IP Address IP, user attempting to cancel a job.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
5. Monitoring and Configuring the Printer Message Problem and solutions exiting The lpd service has ended and the system is exiting the process. Exit pserver (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. Frametype = The frame type name is configured to be used on NetWare. httpd start. The httpd service has started. IEEE 802.11b mode Displays IEEE 802.11b communication mode. 5 inetd start. The inetd service has started. Interface (interface name): Duplicate IP Address (IP The same IP (IPv4 or IPv6) address was used. Each address). IP address must be unique. Check the address of the device indicated in [IP address]. < Interface > started with IP: < IP address > IP address (IPv4, or IPv4 address) has been set for the interface and is operating. < Interface >: Subnet overlap. The same IP address (IPv4, or IPv6 address) and the subnet mask is used with other device. IPP cancel-job: permission denied. The printer could not authenticate the name of the user attempting to cancel a job. IPP job canceled. jobid=%d. The spooled job was canceled due to error or user request. LeaseTime=(sec), RenewTime=(sec). The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal time is displayed in [renew time] in seconds. Login to fileserver (,) in the NDS or BINDERY mode. Memory allocate error. Data cannot be obtained. Disconnect the USB cable, and then connect it. 246