Ricoh Aficio SP 9100DN Software Guide - Page 198
dhcp, You can select which interface has DHCP parameter priority.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
5. Monitoring and Configuring the Printer • Reset the printer name to its default. dhcp Use the "dhcp" command to configure DHCP settings. View settings The following command displays the current DHCP settings. msh> dhcp Configuration You can configure DHCP. msh> dhcp "interface_name" {on|off} • Click {on} to enable DHCP. Click {off} to disable DHCP. 5 • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}. • wlan can be specified only when the IEEE 802.11b interface unit is installed. Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b interface Current interface priority configuration display msh> dhcp priority Interface priority configuration msh> dhcp priority "interface_name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. DNS server address selection msh> dhcp dnsaddr {dhcp | static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". Domain name selection msh> dhcp domainname {dhcp | static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. 196