Ricoh Aficio SP 9100DN Software Guide - Page 212
smb, snmp, Deleting Computer Nam
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
5. Monitoring and Configuring the Printer • You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and Netware 6/6.5. Using the "slp" command, you can configure the value of TTL which can be used by SLP multicast packet. • The default value of TTL is 1. A search is executed only within a local segment. If the router does not support multicast, the settings are not available even if the TTL value is increased. • The acceptable TTL value is between 1 and 255. smb Use the "smb" command to configure or delete the computer or workgroup name for SMB. Computer Name settings msh> smb comp "computer name" 5 • Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be entered. Working Group Name settings msh> smb group "work group name" • Set workgroup name using up to 15 characters Comment settings msh> smb comment "comment" • Set comment using up to 31 characters Notify print job completion msh> smb notif {on | off} • To notify print job completion, specify "on". Otherwise, specify "off" Deleting Computer Nam msh> smb clear comp Deleting Group Name msh> smb clear group Deleting Comment msh> smb clear comment View Protocol msh> smb protocol snmp Use the "snmp" command to display and edit SNMP configuration settings such as the community name. 210