Ricoh Aficio SP 9100DN Software Guide - Page 193
Remote Maintenance by telnet, Using telnet, Some commands cannot be used depending on your printer.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Remote Maintenance by telnet Remote Maintenance by telnet • Remote Maintenance should be password-protected so that access is allowed to administrators only. • The password is the same as the one of Web Image Monitor administrator. When the password is changed using "mshell", other passwords change also. • Some commands cannot be used depending on your printer. Using telnet Follow the procedure below to use telnet. • Only one user at a time can log on to perform remote maintenance. 5 1. Use the IP address or the host name of the printer to start telnet. % telnet "IP_address" 2. Enter your user name and password. Contact your administrator for information about the settings. 3. Enter a command. 4. Quit telnet. msh> logout The configuration message about saving the changes appears. 5. Enter "yes" to save the changes, and then press the [OK] key. If you do not want to save the changes, enter "no", and then press the [OK] key. To make further changes, enter "return" at the command line, and then press the [OK] key. • If the message "Can not write NVRAM information" appears, the changes are not saved. Repeat the procedure above. • When the changes are saved, the network interface board is reset automatically with that changes. • When the network interface board resets, the print job in print process will be printed. However, print jobs in queue will be canceled. 191