Tripp Lite 0SU70032 Owner's Manual for 0SU70030 / 0SU70032 KVM Switches 933207 - Page 58
Restoring Fact, tory Defaults
View all Tripp Lite 0SU70032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Troubleshooting - Safe Mode Restoring Factory Defaults To enter Safe mode: 1. While powering up Smart 108/116 IP, press and hold down the Go Local button on the back panel of the unit for three to four seconds. The device boots up in Safe mode. 2. Wait until the unit finishes booting (one to two minutes). 3. Determine the IP address of the Smart 108/116 IP unit. The IP address depends on whether or not there is a DHCP server on the network. If there is, the DHCP server assigns an IP address to the Smart 108/116 IP unit. If there is no DHCP server, the unit boots with the static IP address 192.168.2.155. 4. Open Internet Explorer and type into the Address box: http://IP address/config. (Do not start the address with https.) The Login page appears. Figure 46 - Login Page 5. In User, type username admin , and in Password, type SAFEmode (case sensitive). (This username and password works only in Safe mode.) A menu appears. Figure 47 - Safe Mode Menu 5.2 Restoring Factory Defaults You can restore all Smart 108/116 IP settings to their default values. 58 | Smart 108/116 IP