Uniden BCD325P2 Owners Manual - Page 43
Set Quick Key, Set Start-up Key, Set Number Tag, Set Lockout
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Set Quick Key Set Start-up Key Set Lockout Set Hold Time Set Audio AGC P25 Waiting Time Set Number Tag Set Selay Time Set Quick Key Assigns a quick key to a system. The system will be scanned when its quick key is enabled. The default setting is no quick key. 1. Scroll to 'Set Quick Key' and press E/yes. 2. Scroll to the quick key number (0-99 or .no for no quick key) you want assigned to the system and press E/yes to save and exit. Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20, etc. then scroll to second digit. Set Start-up Key Allows you to turn on the scanner with the system unlocked using the Startup Configuration. The default setting is no startup key. 1. Scroll to 'Set Startup Key' and press E/yes. 2. Scroll to (or enter) the startup key number (0-9 or .no for no startup key) you want assigned to the system and press E/yes to save and exit. Set Number Tag Allows you to number a system. The default setting is no number tag (blank). See also Using Number Tags. 1. Scroll to 'Set Number Tag' and press E/yes. 2. Enter the number tag (0-999) and press E/yes to save and exit. Set Lockout Determines whether a system will be scanned or not (even if the quick key for the system is turned on). 'Temporary L/O' means until you cycle power. The default setting is unlocked. 1. Scroll to 'Set Lockout' and press E/yes. 2. Scroll to 'Temporary L/O', 'Unlocked' or 'Locked' and press E/yes to save and exit. Note: You can also toggle system lockout by holding on the system in scan mode and pressing E/yes then L/O. 43